Anycubic Kossel Linear Plus Light weight Effector upgrade E3D V6 (Volcano too) and 5015 blower

SummaryEDIT: 02.10.2020 If you want you can make it complete with very lightweight rods (9g each)https://www.thingiverse.com/thing:4396638EDIT 16.8.2020 : added information about nozzle and calibrating switch offset, which is 4,1 mm.EDIT: VERY IMPORTANT: If you use PTFE tube and remte extruder as original on kossel, then please reduce retraction value to 3,5 mm. Otherwise hetacreep occur with full metal hotend.Edit 15.5.2020 :After assembly I realized the screws M3x20 for horseshoe clamp are longer so they goes out a little from the wall outside. I adjust clamp so they are hidden in the hole now as it should be. Added blower holder with bigger hole 4 mm for our friends from US, they have a problem to buy some metric screws.Also added offset holder for magnetic holder for original calibration switch.And use the most powerful fan 30x30x10mm or 30x30x15mm better. I am iusing Sunon 30x30x15 mm type: MC30151V1-000U-A99.The heatsink need to be cooled well to prevent heartcreep. Especially PL