Anycubic M7 - Ajustable leveling feet

M7 leveling feet Here's your solution: if you're a freak like me and love it when your printer is perfectly leveled. With these adjustable feet, you have 12mm (1/2'') of range to adjust the height of the printer. The feet come in 3 pieces, Base, thread, and knob.  1)The base fits directly into the existing feet. to print, you must add support on the bottom of the feet where the head of the threads will go. 2) Threads can be screwed or glued to the base. I have use #4 wood screw 1/2'' long to the assemble parts together. The hole inside the feet got chamfer to clear the screw head. 3) Knob has a good diameter with a grip to facilitate leveling. Having your printer leveled will ensure an equal level of resin in the vat and a good circulation of resin with the M7 Pro Pump & heater. There is also some belief that having the printer level could decrease the risk of having print failures. When I level my printer I always check in both axis to make sure the printer is equally level. You will need to print 4 sets totalizing 124G of filament with a 15% infill, It take around 4H to print the full set with a Kobra 3 with a layer height of 0.2mm at normal speed.