Anycubic MEGA X-Axis Camera Mount

With this model, you can mount your webcam to the X-axis to have your camera following the print height.
Initially, I made this to monitor the nozzle easier but it turned out that it's also a nice effect for the timelapse.

Note:
====================
Even though the mount uses screws to attach to the X-axis, you will need some hot glue to prevent more wobbling. Just put there as much as you can and you're good to go.

I also added some other files with different lengths without the screw holes to fit on other similar printers. There is plenty of surface, so be sure to use enough hot glue.

**The mount is always 65mm high.**