Anycubic Predator hide & hook

What for and how to:

This mod hides the filament sensor and hooks the main cable for easy movement.

Instruction:

1. Remove the top cover, filament sensor, ptfe tube and ptfe stopper nut
2. Disconnect the sensor from the metal holder and put it back upside down
3. Install and plug the sensor to the upper box using the same bolts (double check direction)
4. Insert the main cable into the printed hook as pictured (prepare for tight fitting)
5. Tighten the hook with ptfe stopper nut as pictured and close the top cover with the printed plug
6. Cut your ptfe tube into 2 pieces or find a similar one
7. Slightly insert the tubes as pictured, install the filament through the sensor and then rotate the tubes in completely

Done!