Anycubic Vyper direct drive

Russia comunity in telegram https://t.me/anycubic_vyper
Installing this mod takes 30 minutes. In addition, you need to have 4 wires 35 cm long, a soldering iron, heat shrinkage, this is necessary to lengthen the native wire to the extruder motor. When soldering and lengthening the wire to the extruder motor, you need to turn the plug to the motor 180 degrees, so that the motor rotates in the right direction, because bmg is a little incorrect at the factory. The bracket itself is put on 2 metal bushings (they fit into the holes, I did it with a vice) between the brace and the bearing, I spied this idea from @sashalex007 how he attached the direct drive to the Ender 3.