Anything Hanger

After tons of feedback from the picture perfect hanger: https://makerworld.com/en/models/948034#profileId-915265I have created a new product with a similar goal: The Anything Hangerensure you have a clean bed. if you have issues with adhesion still, use a brim. Please select the profile that matches the dowel rod you have. Please note I do not recommend using anything less than a 10mm or 3/8" rod, it could possibly work but youre asking for trouble.If the height rod (moves in Z direction to get top of frame) is too short, you can replace it with a standard 8mmx8mm square dowel or a 5/16"x5/16" square dowel The dowel rod may need parts of it sanded, I have found many of them are inconsistent in thickness across the rod. Step 1: Place a standard dowel rod inside of the hole of the base.Step 2: Slide the screws on each side of the base and you can screw them into place. Step 3: Slide the height rod in from the top or bottom (dealer's choice). This will allow you to get the