Apex O3 Camera Mount

Camera Mount for the O3 Air Unit to try and reduce as much of the frame as possible from the view. The very top corners of the frame are still visible but this is as good as it gets without removing the camera from the frame.

NOTE: You must remove the front stand offs, install the 10mm short stand offs on the bottom and then use a long bolt from the top to bridge the gap. Use a M3 nut on the underside of the top plate to stop the top plate from flexing downwards. This is not an ideal solution but the reality is you need a new frame or you put up with the frame in the camera view.

You need to flip one of the mounts for the other side, they are handed.