Slicer Discord
Aphid  Trap cards – 3D printable model from Thingiverse Thingiverse

Aphid Trap cards

by Taleya
5 Downloads
3 Likes
0 Makes
Go to Model
Aphids are hella attracted to yellow, which is why you can by trap cards for them.

Thing is, they're stupidly (for the value) expensive in Australia for something you use and then throw away, so I made some reusable ones. Based on the "On-Guard Outdoor Protector" brand, and will fit in side their proprietary cages (will not be able to use clips at both ends as you can't fit a full size card on a standard bed, but the 2mm rigidity holds them in place)

Two versions, one with holes so it can be hung / mounted in the cage, the other a flat card that works great with Pippa666's Stand for sticky traps or can even just be nailed to a stick.

For the sticky element on the trap, I use Tree Guard Glue, although I believe in the US a good alternate is Tanglefoot tree glue. Once the card is full of bugs, simply clean off the old glue (and dead bugs) with soap and water and re-apply.


May eventually come up with a custom cage. Twist my arm.

Print in yellow (obviously)
Source
Thingiverse
What you need to print this: Intermediate Low confidence
Why?
very large print
Single piece May need scaling or splitting
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 3/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
300 mm (Extra large)
Post-processing
Gluing
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection