Slicer Discord
Apple Watch Clamp – Modello 3D stampabile da MakerWorld MakerWorld
Gadgets

Apple Watch Clamp

509 Download
170 Likes
357 Makes
Vai al Modello
I split this into 3 parts: The clamp itself, a nut and a bolt. I recommend printing the nut and bolt at lower layer heights for cleaner overhangs and a better fit. I used 0,12mm. I also scaled down the bolt to 99% in x and y In the slicer. Do not change z scale, as this affects the pitch and wouldn’t fit into the nut anymore. The clamp is designed to be printed on its side, the cable canal facing downwards. no supports are needed, holes are teardrop shaped, which works pretty good. I used PETG, 3 perimeters and 15% cubic infill. I designed the hole for the apple charger with a clearance of 0,2mm in diameter. If you need changes to this, im happy to do so. For Maximum table thickness is ~44mm. I can provide a longer bolt in the future for really thin tables. I'm happy to implement changes, if you have any requests. EDIT 29.06.2023: -added Bolt versions _45mm and _55mm, which make the original clamp work with thinner tables (min. 0mm for the 55mm version) -added clamp version for thinner
Categoria
Gadgets
Fonte
MakerWorld
Pubblicato
Aggiornato
Cosa serve per stampare: Intermedio Media affidabilità
Perché?
senza supporti · assemblaggio di 3 parti
Senza supporti Viteria richiesta
Supporti 0/3
Assemblaggio 1/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 1/3
Stampante
FDM / FFF
Formato file
STL
Materiale
PETG
Post-elaborazione
Viteria
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione