Thingiverse
Aquarium Sponge Filter
von DerpFishStuff
6
Downloads
6
Likes
0
Makes
A simple air powered sponge filter.
Print the tubes on their Side with supports touching build plate
The other parts can be printed on their end with no support
To make the filter parts, print as infill only with no walls and no top/bottom. Align the filter so the flat size is down during printing. I use 30% gyroid infill. Alternatively don't print this part and just use a regular sponge on each side of the hole tube.
Make sure to use an aquarium safe filament such as food grade PETG if you plan to have live pets in the tank.
Print the tubes on their Side with supports touching build plate
The other parts can be printed on their end with no support
To make the filter parts, print as infill only with no walls and no top/bottom. Align the filter so the flat size is down during printing. I use 30% gyroid infill. Alternatively don't print this part and just use a regular sponge on each side of the hole tube.
Make sure to use an aquarium safe filament such as food grade PETG if you plan to have live pets in the tank.
DerpFishStuff veröffentlicht auch auf
18 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
