Thingiverse
AR & Mag Wall Mount
von bryantsell
2
Downloads
5
Likes
0
Makes
### Update
Redesigned to add more bracing. Recommend using a stronger filament than PLA plus or pro - Made a simple filament reference list here https://bsell93.github.io/filament/
Remix of AR/Mag wall mounts. Integrated Mag holders into wall bracket for the AR - can be mounted separately if desired. Modified the AR mount to be as long as a 30rd mag since my Keltec RDB with fore grip would not secure on the wall with the shorter version.
Print 3 to 5 walls for added strength. I used infill 20%
Ideally print on its side flat on the bed or at an angle to avoid the layers pulling away from the vertical forces
If desired I can make a version that has the two pieces integrated into one. Let me know.
Check out my other Keltec RDB things:
Flared magwell: https://www.thingiverse.com/thing:6847582
Bolt release lever: https://www.thingiverse.com/thing:6836124
Redesigned to add more bracing. Recommend using a stronger filament than PLA plus or pro - Made a simple filament reference list here https://bsell93.github.io/filament/
Remix of AR/Mag wall mounts. Integrated Mag holders into wall bracket for the AR - can be mounted separately if desired. Modified the AR mount to be as long as a 30rd mag since my Keltec RDB with fore grip would not secure on the wall with the shorter version.
Print 3 to 5 walls for added strength. I used infill 20%
Ideally print on its side flat on the bed or at an angle to avoid the layers pulling away from the vertical forces
If desired I can make a version that has the two pieces integrated into one. Let me know.
Check out my other Keltec RDB things:
Flared magwell: https://www.thingiverse.com/thing:6847582
Bolt release lever: https://www.thingiverse.com/thing:6836124
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!