Thingiverse
Ar Wing Mini Body
by cloudey
16
Downloads
10
Likes
0
Makes
This model is an upgraded body for the SonicModell AR Wing Mini. The original foam construction breaks on impact, but this model, printed from TPU, is indestructible (not a scratch after a head on crash into a metal pole at ~75 kmh).
This Thing is made of 2 parts: a body and canopy.
The body has a cutout for this camera https://www.amazon.ca/gp/product/B01N48QUIP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 and has holes on the bottom for elastic bands (to tie down the canopy), which can then be stretched to remove/change batteries.
The canopy fits this battery https://hobbyking.com/en_us/turnigy-nano-tech-1500mah-3s-35-70c-lipo-pack.html?___store=en_us has space for camera wiring underneath, and a spot for the FS-i6a receiver. Zip tie the antenna from the VTX to the holes at the rear.
Total print time at a 0.15 mm resolution + 10% infill with TPU (no supports) is 19 hours. Fusion 360 files are included.
This Thing is made of 2 parts: a body and canopy.
The body has a cutout for this camera https://www.amazon.ca/gp/product/B01N48QUIP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 and has holes on the bottom for elastic bands (to tie down the canopy), which can then be stretched to remove/change batteries.
The canopy fits this battery https://hobbyking.com/en_us/turnigy-nano-tech-1500mah-3s-35-70c-lipo-pack.html?___store=en_us has space for camera wiring underneath, and a spot for the FS-i6a receiver. Zip tie the antenna from the VTX to the holes at the rear.
Total print time at a 0.15 mm resolution + 10% infill with TPU (no supports) is 19 hours. Fusion 360 files are included.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!