AR15 Vise Bench Block

Remix of the AR15 Vice Block by PrintedFirearm

Recommended to print in ASA or PETG-CF. Included two K1C gcode files for ASA and PETG-CF. The block is subject to a lot of horizontal stress when torquing down the buffer tube nut or barrel nut. I found PLA to be far too brittle and began cracking below 50% infill from the inside. ASA with 100% infill withstood brutal punishment without failing and PETG-CF performs well with some slight flexibility if you don't want to deal with the ASA off gassing.


Infill
60-100%

Walls
3-5

Brim
No

Supports
No

Layer Height
.20 or larger