Arbor Press

Arbor PressEverything is already oriented correctly for printing for both strength and no supports required. Took me ¼ roll of filament and 4 hours to print. Make sure you have good xy contour compensation values. With 0.2 layer height and 0.42 line width, I used 5 walls, 5 top, and 5 bottom layers with 50% adaptive cubic infill. I printed in PETG. BOM:Print 1 of each part except for the BearingAxels, print 3 of those, and only 1 of the racks. One rack is just plastic and the other can take a 10