Arcane Jinx Fishbones

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200.08x250mm in size You may print at higher layer heights below the Min Depth of 0.64mm The Max Depth is 1.4mm and the Actual Depth is 1.4mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Cyan Transmission Distance: 4 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #14 (1.12mm) swap to Cyan for the rest. It is NOT necessary to add the layer changes manually. When you open the file directly from Bambu Studio and slice it, the layer changes will appear automatically AFTER slicing along with the prime tower. If for whatever reason you need to add the layer changes manually, here is a guide. (These example pictures are from a DIFFERENT HueForge I created): Open the file and slice it. Go to the “Preview tab” In the preview tab, look for the small round gr