Thingiverse
Archery Target Face Pin
28
Download
15
Likes
0
Makes
This is an archery target face pin that you can 3d print. The part doesn't require support, but you can add it if you would like so the front pin is supported a little more.
It was designed for .3 mm layer height, and I recommend printing in something with some flex to it. I used PLA+ and it is working great, but if you can print in nylon, I would recommend that. Also you should print it a little hotter than normal (there really aren't important overhangs) so that the plastic on the pin part fuses together well.
You can see the then in use in my archery target build video: https://youtu.be/3jH1nYfO-4o
It was designed for .3 mm layer height, and I recommend printing in something with some flex to it. I used PLA+ and it is working great, but if you can print in nylon, I would recommend that. Also you should print it a little hotter than normal (there really aren't important overhangs) so that the plastic on the pin part fuses together well.
You can see the then in use in my archery target build video: https://youtu.be/3jH1nYfO-4o
BuildItMakeIt pubblica anche su
9 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
