Architectural Trees Basic Pack #1 - Cone shape

3 individual tree/plant models for architecture projects optimized for 5 different scales, print-in-place. H(max)=28.6mm
Use freely in your own architectural projects with attribution to Citylab.lv, or purchase a Commercial-Use License on my website citylab.lv.

**(!)** Print with the settings below. A small inaccuracy can lead to a failed print when printing trees and plants with overhangs. So most importantly - print with low speeds (but not too low), including travel, and minimize warping on overhangs, so keep cold air away from the print. Keep bed temp a little higher for some material softness if the trees have trunks, so it can bend a little without breaking. Use 0% infill and no supports.
**(!)** Changing scale not recommended
**(!)** Tested only on Core-XY printers (bedslingers not recommended)

Example project building **[TIMELAPSE](https://www.youtube.com/watch?v=Sp_adARLums)**

For any feedback and inquiries contact me: [email protected]

___
Universal settings for all 3D