Thingiverse
ArcVase1-update
door bbinnard
8
Downloads
7
Likes
0
Makes
I used circular arcs to build the basic shape of this part. The photos show the STL file SCALED DOWN TO 50% BEFORE PRINTING because the full size print said it would take 2 days to print. This print took a few minutes more than 11 hours using a print speed of 90 mm/sec and a layer height of 0.200 mm.
I'll add photos of the full size print when it finishes.
2 days later:
I've added 2 photos of the full size print next to the 50% scale print. The full size print took 44 hrs 21 min to print, so most people probably won't want to do this. But scaling it to a smaller size works quite well.
I'll add photos of the full size print when it finishes.
2 days later:
I've added 2 photos of the full size print next to the 50% scale print. The full size print took 44 hrs 21 min to print, so most people probably won't want to do this. But scaling it to a smaller size works quite well.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
