Thingiverse
ArDos dosimeter BOX
door Aimpus
1
Downloads
3
Likes
0
Makes
Project page https://arduino.ru/forum/proekty/ardos-dozimetr-prodolzhenie-temy-chast-%E2%84%962
EN:
The ArDos dosimeter case for the board from the user "Alexadresat". There is a version with a protective cover, with a regular grid and a closed type. It is recommended to remove the carbolite inserts from the SBM-20 and lay the tube in the hole niche. The "protective cover" model is designed to protect the SBM-20 during storage and transportation of the dosimeter, used together with the open version of the case. The cover is attached to magnets measuring 4x2 mm over the bottom of the case, the mounting option "magnet + magnet" or "magnet + bolt" (size M2 for a flat-head hexagon) is provided. The button model is made for tact buttons measuring 6x6x9 mm. The battery used is type "102050" for 1000 mAh, fasten at your discretion (hot glue, instant, double-sided tape ...). The charging module is attached to glue on a special platform. Self-tapping screws for fastening the board and the top
EN:
The ArDos dosimeter case for the board from the user "Alexadresat". There is a version with a protective cover, with a regular grid and a closed type. It is recommended to remove the carbolite inserts from the SBM-20 and lay the tube in the hole niche. The "protective cover" model is designed to protect the SBM-20 during storage and transportation of the dosimeter, used together with the open version of the case. The cover is attached to magnets measuring 4x2 mm over the bottom of the case, the mounting option "magnet + magnet" or "magnet + bolt" (size M2 for a flat-head hexagon) is provided. The button model is made for tact buttons measuring 6x6x9 mm. The battery used is type "102050" for 1000 mAh, fasten at your discretion (hot glue, instant, double-sided tape ...). The charging module is attached to glue on a special platform. Self-tapping screws for fastening the board and the top
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
