Arduino Case with Multifunction-Shield

-- German text below --

-------
Based on a lasercutter pattern (from c't Make 03/18) I modeled a 3D model for an arduino with multifunction-shield case. The idea and design belongs to c't Make magazin. The 3D model comes from me. It's my first model ever, so here are some advice for working with it:

- It's helpful to ream the bolt hole after printing
- It's helpful to sand the button holes, so the tacks can move easily
- the button-tacks (V4_Knöpfe_Arduino) are in different size, so you can try to find the best fitting tack.
- the button-tacks (V4_Knöpfe_Arduino) are printed with 100% infill. The rest with 15% infill.
- for the sides you need 4 screws: M2 x 20 and 4 M2 female screw
- to bring the arduino at the backside you need 3 screws: M2x20 and many M2 female screws (I used á 4 between arduino and backside and á 2 on the other side of the backside to tighten everything)

Here some information for printing the pieces:
- in CURA please turn off the setting "Union Over