Arduino dusk/dawn clock timer

This is an enclosure intended for an Arduino based timer, as described in this [instructable](https://www.instructables.com/id/Arduino-Duskdawn-Clock-Timer/)

The timer provides a week and weekend program, and can switch 1 light at either:
* Dusk
* Dawn
* Specified time

The program can be set on the timer itself, using the rotary encoder and menu presented on the OLED screen.

The following electronics are required:
* Arduino Nano
* Power supply 5V 0.6A (34 x 20 x 15mm)
* Solid-state relay 5V - Active low - 2A 230VAC
* Real time clock DS3231 (small)
* 0.96” OLED display SPI 128*64 pixels
* Rotary encoder - EC11 - 20mm

After mounting all the electronics 4 M3x25mm screws are required to assemble the enclosure.

The Arduino software for this timer can be found at [github](https://github.com/escheppink/Arduino-dusk-dawn-clock-timer).