Aricebo reply - Hueforge

Aricebo message printed with Hueforge.You will need 7 colors for this, the lowest TD you have, the best result you'll get : ) The 3mf already has all the layer swaps in place, but if you wish to reproduce it using the stl, here are the instructions : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 49.36x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.7mm Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.1PLA BambuLab Basic Magenta Transmission Distance: 3PLA PolyTerra Army Red Transmission Distance: 0.3PLA BambuLab Basic BambuLab Green Transmission Distance: 2.1PLA BambuLab Basic Yellow Transmission Distance: 5.2PLA BambuLab Basic Cyan Transmission Distance: 1.7PLA BambuLab Matte Ivory White Transmission Distance: 3.4This print uses 7 unique filaments Swap Instructions:Start with CharcoalAt layer #6 (0.56mm) swap to MagentaAt layer #10 (0.88mm)