Ariel - Everborn Saga

Ariel, from The Everborn Saga Comic Universe by Stephen A.M. Johnson Ariel is a restless troublemaker and one of only two humans in a wolf warrior clan, raised under a fragile truce he barely understands and trained in secret by his guardian Baldemar. He dreams of adventure beyond the wildwood, but a prophecy says he’s the one destined to face the Immortal Seraph Magnus (The Everborn) ... whether he’s ready or not.  Ariel’s Adventure will decide whether he becomes the savior foretold… or the spark that ignites the war that ends the world. You can learn more about this story at https://www.everbornsaga.com/  Supports ARE required on only two parts, hair and glove_right. See notes for specific printing and assembly tips. If you have the proper filament colors, no painting is needed. The assembled model is 180mm tall  Enjoy! ........................................................................................................... As part of the verification process, Stephen A.M. Johnson printed his first copy, (of many more to come) at 200%. His print is in the pictures section. Note: Stephan reached out to me to make this model of his main character. I do not charge for my work but choose my models with care. I found Stephan extremely knowledgeable and is very passionate about his work, so I took on this project.   ........................................................................................................... **Print Instructions:** Supports: YES on two parts, hair and glove_right Resolution: .2mm Infill: 15% Notes:** Refer to the notes below for a few helpful printing and assembly instructions. ........................................................................................................... **Building the model** Colors (These are the colors I used and should only be considered as suggestions) Silver or Light Grey: (Devil Designs PLA - Light Grey) bag_strap_buckle bag_buttons boots_grey_back_left boots_grey_back_right boots_grey_front_left boot