Arrma Senton Front Lights

I created a 3D model of the front in Fusion360 on an Arrma Senton 3S RC car model. Made from Google image. I have a set of data from modeling in the program.The front cover of the lights is made of TPU, the inside is transparent clear and orange. During assembly, I recommend using instant glue to glue the clear and orange together. Carving the body is not easy and it is really strong, so use a skalpel. When you put the front cover in the body and it fits firmly, then fit the back cover into which you stick the 5V COB led strip. I used warm white. I cut it as needed and soldered the cables. Glue the transparent parts to the sides of the TPU. I recommend that after the front side is glued, the back side should be glued with silicone so that water does not leak there. The cables are a classic two-line connected via a connector to the receiver, and the lights are controlled via a radio.Before printing you will need:TPU black at least 95A, Transparent orange and clear, scalpel, cables, sili