Thingiverse
Arrows F-15 Thrust Tubes
por pstrachan
2
Descargas
0
Likes
1
Makes
Arrows RC F-15 twin 64 EDF Thrust Tubes.
Tubes are 63mm OD down to 57mm OD on the tailpipe end, with a 1mm wall. 115mm tall. Install by removing the EDF units, flexing the larger end of the tube forward first, then backing it into the exit end of the channel (one-way fit). Will fit fairly snuggly, but can secure with thin double-sided tape and/or a bead of glue. 3 files included, print separately or both on the plate.
Tubes are 63mm OD down to 57mm OD on the tailpipe end, with a 1mm wall. 115mm tall. Install by removing the EDF units, flexing the larger end of the tube forward first, then backing it into the exit end of the channel (one-way fit). Will fit fairly snuggly, but can secure with thin double-sided tape and/or a bead of glue. 3 files included, print separately or both on the plate.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!