ARS-42 Lithophane

Probably more of a niche personal project for me but I decided to share. It is hard to get a good picture due to the backlight. It can be printed with the color or without for a more traditional lithophane. I included an STL file with a light box but you can design your own or use a stand. I did have to sand the edges a bit to get it to slide into the frame. Project: Reclaimer2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 175x102.82mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.1mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite White Transmission Distance: 5 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Blue Transmission Distance: 4 PLA PolyLite Black Transmission Distance: 0.3This print uses 4 unique filamentsSwap Instructions: Start with White At layer #9 (0.8mm) swap to Gray At layer #11 (0.96mm) swap to BlueBorder Only Colors from here until the end. At