Arthur Morgan Hueforge

Project: Arthur Morgan.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.64mm The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.1 #c00d1e PLA BambuLab Basic Red Transmission Distance: 3.7 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.2 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.8 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #17 (1.44mm) swap to Jade White At layer #21 (1.76mm) swap to Black At layer #23 (1.92mm) swap to Jade White for the rest.