Thingiverse
Articulated PiCam Mount
von 4iqvmk
184
Downloads
87
Likes
0
Makes
Articulated camera mount for the Raspberry Pi Camera. I made this to mount a PiCam to my Ikea Lack enclosure. The brackets screw together to form articulation links allowing flexible orientation in 2 axes. Each bracket can attach to another bracket with M3 screws with 8 mm spacing.
Tested with the PiCam v2.0 camera.
Uses the following M3 hardware:
* M3 hex nuts - 3x per nut_side_bracket
* M3x25 cap head screws - 1x per articulation joint
* M3x8 cap head screws - 2x per bracket to bracket joint
I used this thing to manage the ribbon cable in my Lack enclosure: https://www.thingiverse.com/thing:3729953
Tested with the PiCam v2.0 camera.
Uses the following M3 hardware:
* M3 hex nuts - 3x per nut_side_bracket
* M3x25 cap head screws - 1x per articulation joint
* M3x8 cap head screws - 2x per bracket to bracket joint
I used this thing to manage the ribbon cable in my Lack enclosure: https://www.thingiverse.com/thing:3729953
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
