Artist-D Hemera Mount

This is a complete removal of the Artist-D Extruders and replacement with the E3D Hemera. The Hemera's are not symmetrical, so this was designed with E1 plate being thin and E2 plate being thick. I've included two different plates for E2. The first is non adjustable. The second uses dovetail shaped items and square nuts so you can adjust the height of the nozzle by setting it and tightening 3 M3 screws. Hemera's with their fans fit inside the envelope of the stock metal housing, so you lose no print volume.

Other items purchased:
M3 Screw Assortment: https://smile.amazon.com/gp/product/B08H24W42K
M3 Square Nuts: https://smile.amazon.com/gp/product/B018503K94
5015 Blower Fan: https://smile.amazon.com/gp/product/B07DB7DLMM
JST Connector Wires: https://smile.amazon.com/gp/product/B076JFFDWN

You can keep your stock extruder and wiring intact. I soldered the JST connectors on to new fans, etc. I used the Daughter board in the stock extruders which breaks-out the ribbon cable to