Thingiverse
Ascent 18 Spring Cups
par afarniok
6
Téléchargements
5
Likes
0
Makes
Spring Cups for the Redcat Ascent 18
The "LOW" drops the spring about 5mm
The "MID" drops the spring about 4mm
Drops the whole truck down and adds sag in order to lower the CG.
I run the stock cups in the rear and the Low in front but I am by no means a comp crawler
These cups simply push on and stay in place. I recommend a dab of glue on the top of the springs so that the spring stays attached to the TOP portion of the shock (not the 3d printer cup)
The "LOW" drops the spring about 5mm
The "MID" drops the spring about 4mm
Drops the whole truck down and adds sag in order to lower the CG.
I run the stock cups in the rear and the Low in front but I am by no means a comp crawler
These cups simply push on and stay in place. I recommend a dab of glue on the top of the springs so that the spring stays attached to the TOP portion of the shock (not the 3d printer cup)
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !