Ash's Ultimate Cable Channels

I improved upon my original design so it is now fully screw compatible. I can now say for certain this is awesome!
This new design features a 3mm pilot hole for the screw shaft, and an 8mm wide sunken area for the head of the screw. This hole is 2.4mm deep and it will therefore hide most reasonable screws. You can use oversized screw if you want to at your own peril.
The 3mm wide cable slit has become standardized with this iteration of my design. If you desire a tighter or loose fit, you can edit the .obj files.
I verified that all screws in my screw kit worked before publishing my work.


Version 1: https://www.thingiverse.com/thing:6893297
Version 2: https://www.thingiverse.com/thing:7286510
Version 3: https://www.thingiverse.com/thing:7286518



INSTRUCTIONS:

Use your cable to push down one lip, then slide it towards the other lip while lifting that lip slightly. If done correctly, you may hear a satisfying pop.
Done.


MOUNTING INSTRUCTIONS:

Optionally drill a pilot hole for th