Thingiverse
ASRock A300 Optional Case
door n3verless
4
Downloads
2
Likes
0
Makes
Because of two 60mm Noctua Fans and a few hours of free time i decided to create a optional Case for the Asrock A300 (it will fit the X300 also!).
The Case consists of two halves that are connected with M4 Brass Standoffs. Every mounting hole needs Male-Female two 15mm, one 10mm and one 10mm Female-Female. Also you need a 18mm Push Button for the On-Off-Switch. It is possible to mount the original USB2-Front-Expansion.
With this case you are going to loose the Onboard-Front-IO! The only thing that speaks for this case is the excelent cooling.
The Case consists of two halves that are connected with M4 Brass Standoffs. Every mounting hole needs Male-Female two 15mm, one 10mm and one 10mm Female-Female. Also you need a 18mm Push Button for the On-Off-Switch. It is possible to mount the original USB2-Front-Expansion.
With this case you are going to loose the Onboard-Front-IO! The only thing that speaks for this case is the excelent cooling.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
