Slicer Discord
Astro Boy Hueforge – 3D-Druckmodell von MakerWorld MakerWorld
Hueforge & Lithophane

Astro Boy Hueforge

80 Downloads
67 Likes
51 Makes
Zum Modell
Description 2 versions available, 4 colors and 5 colors 5 colors: Project: Astro Boy.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 174.86x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to BambuLab Green At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #14 (1.2mm) swap to Jade White At layer #16 (1.36mm) swap to Yellow At layer #17 (1.44mm) swap to Jade White for the rest. 4 colors: Project: Astro Boy 4 couleurs.hfp Print at 100% infill with a layer heig
Kategorie
Hueforge & Lithophane
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Fortgeschritten Mittlere Konfidenz
Warum?
4 Farben · großer Druck
Einteilig 4 Farben / AMS
Supports 1/3
Zusammenbau 0/3
Einstellungen 3/3
Druckbett 2/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
240 mm (Groß)
Farben
4 (AMS/MMU empfohlen)
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Dakiren veröffentlicht auch auf

29 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen