Thingiverse
Astrolux S1 / Blf A6 Light diffuser
door bftech
9
Downloads
8
Likes
0
Makes
This is a light diffuser for Astrolux S1 / Blf A6 flashlight.
I printed it with transparent white PLA and the results are great ! You can try with other colors but I don't know if this will work well.
This may be a tight fit, depending of your printer accuracy you may need to sand the inside.
It can also be used for any other flashlight with an external diameter around 23.5mm (23mm will work, 24mm will need a bit of sanding to fit). Ask in the comments for other flashlights.
I printed it with transparent white PLA and the results are great ! You can try with other colors but I don't know if this will work well.
This may be a tight fit, depending of your printer accuracy you may need to sand the inside.
It can also be used for any other flashlight with an external diameter around 23.5mm (23mm will work, 24mm will need a bit of sanding to fit). Ask in the comments for other flashlights.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
