Astronaut Explosion Hueforge

--------- This is my own rendition of flooko's work. You can find his work here: Flooko-Art --------Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1mmThe Max Depth is 2.8mm and the Actual Depth is 2.9mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Orange Transmission Distance: 5.3PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions:Start with BlackAt layer #19 (1.6mm) swap to BlueAt layer #23 (1.92mm) swap to YellowAt layer #26 (2.16mm) swap to OrangeAt layer #28 (2.32mm) swap to YellowAt layer #31 (2.56mm) swap to Jade White for the rest. **NOTICE**To print more than 4 colors through AMS:1. Load AMS with the first 4 colors2. Slice and hit Print.-When prompt assign your first