Astronaut Hueforge

AMS is not needed. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeFilaments Used:PLA Black (Transmission Distance: 0.6)PLA Dark Gray (Transmission Distance: 1.8)PLA Light Gray (Transmission Distance: 0.5)PLA Light Brown (Transmission Distance: 2)PLA White (Transmission Distance: 3.5) Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Dark GrayAt layer #15 (1.28mm) swap to Light GrayAt layer #18 (1.52mm) swap to Light BrownA