Thingiverse

AstroZap Bracket

di skislalom1

15 Download

11 Likes

0 Makes

The Astrozap dew controller is a duty cycle control unit for up to 4 telescope heat bands. The heat generated eliminates telescope, finderscope or camera lens fogging when temperatures change. This is especially important on cold and/or humid evenings. By attaching the Astrozap electronics box to the telescope mount tripod leg, wires are much less likely to be a tripping hazard in the dark and it has a much neater look.

This project consists of two 3D printed parts. The Astrozap bracket is what holds the Astrozap electronics box. The bracket screws onto a leg collar bracket. The collar grips the 2 inch diameter EXOS II Mount tripod leg. These two parts are connected with screws listed below. Note: the leg collar bracket is the same part as the one used to hold the Explore Scientific PMC-eight controller box described separately on my thingiverse webpage.

Many thanks to Wes McDonald for his assistance in developing this bracket!

All Paypal design tips are greatly apprec

astronomy astronomy telescope astrophotography Astrozap bracket EXOS II Explore Scientific mounting bracket telescope telescope accessory telescope mount astronomy astronomy telescope astrophotography Astrozap bracket EXOS II Explore Scientific mounting bracket telescope telescope accessory telescope mount

Fonte

Thingiverse

Cosa serve per stampare: Intermedio Bassa affidabilità

Pezzo unico Viteria richiesta

Supporti 1/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 1/3

Stampante

FDM / FFF

Formato file