Asus Rog Lightbox

Lightbox of Asus ROG - Republic of GamersImportant: Don't need to glue the faces to the box. Models are made to just snap-fit.But you can use hot glue to hold battery or the cables for example.If you use connectors, you can create a completely disassembled box that can be separated into components for easy repair if necessary.Material List to assembly:1x TP4056 charger (I used one with step up boost)1x 18650 Battery1x 18650 Battery Holder (or something to hold the battery inside)1x RGB Controller (If using RGB Led Strip)WS2812B RGB Led Strip (or another Led Strip, in my case, I just used a white one)2x Self screws M1.4x52x Self screws M3x61x Push Button SPST 10x15mm 2 PinUSB-C connector with 2 cablesDupont connectors or jumpers (OPTIONAL) Assembly (If you are going to use connectors, you can follow these steps directly. Otherwise, it will be something similar, but soldered directly.)Solder the wires like this: (pay attention if the connector is male or female):Then solder the wires