AtAt 2

Project: AtAt 2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x170.73mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2mm and the Actual Depth is 1.9mm Filaments Used: PETG Creality Black Transmission Distance: PETG Tpoimns Gray Transmission Distance: PETG Creality White Transmission Distance:This print uses 3 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Gray At