Ateez HueForge

Ateez Hueforge: This model uses 4 unique colors, but will work without the Beige. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 125.49x175mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.4mm and the Actual Depth is 2.5mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA Sunlu Matte White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (1.04mm) swap to Blue Gray At layer #13 (1.2mm) swap to Beige At layer #16 (1.44mm) swap to White for the rest.