Atem mini desk stand

A desk stand to mount the Atem mini switcher with a PSU to power both switcher and a monitor.
The build is documented here:
https://youtu.be/ZH2Kjlq3qsM

You need to print 2x of the PSU Bars. Each of them gets one M3 melt in insert.
The two side plates get 2x M4 melt in inserts on the bottom. The one for the power connector with switch also has two M3 inserts.
I printed the top bar in ASA-CF with the slotted holes for the M6 nuts on the bed. The side plates were printed with the outside surfaces down.

BOM:
4X M6x25 Socket head screws
4x M6 Nuts
1x M5x40 Socket head screw
1x M5 nut
2x M4x10mm CSK screw
4x M4 nut
4x M4 melt in inserts
4x M3x10mm CSK screw
2x M3x 6mm dome head screw
4x M3 melt in inserts
2x 1/4"-20 x10mm socket head screws
Beetronics 12" (mnodel 12HD7M)
Atem Mini Pro ISO
PSU ( KSIBNW LED Trafo 150W from Amazon)
50mm nato rail
Nato rail clamp (Nitze NF49A )
Power connector with switch.
2x 5.5x2.5mm power jacks
wire
ferrules
heat shrink