Thingiverse
ATOM 3DPRINTER 2.5 homemade hot bed
por yyyfly
6
Descargas
5
Likes
1
Makes
A little simple installation instructions
http://www.fox-saying.com/blog/post/46664463
ATOMHeat insulation film => EVA
ATOMafterglass.DXF=>6061 aluminum plate
Other made of 3mm black iron plate.
2.6 holes, tapping m3 teeth
3.6 holes, tapping m4 teeth
ATOMafterglass uses a countersunk screw to chamfer the screw holes
OTHER BOM
countersunk screw M3x10 6PCS
M3x5 4PCS
M3x10 & M3 T-nut*6
M4x5 4PCS (If you install ssr 6pcs)
M5x8 & M5 T-nut x2 for pp
M5x8 & M5 T-nut*84 for ATOMinsidearrmary & ATOM_UPCOVER_new
http://www.fox-saying.com/blog/post/46664463
ATOMHeat insulation film => EVA
ATOMafterglass.DXF=>6061 aluminum plate
Other made of 3mm black iron plate.
2.6 holes, tapping m3 teeth
3.6 holes, tapping m4 teeth
ATOMafterglass uses a countersunk screw to chamfer the screw holes
OTHER BOM
countersunk screw M3x10 6PCS
M3x5 4PCS
M3x10 & M3 T-nut*6
M4x5 4PCS (If you install ssr 6pcs)
M5x8 & M5 T-nut x2 for pp
M5x8 & M5 T-nut*84 for ATOMinsidearrmary & ATOM_UPCOVER_new
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!