Thingiverse
Atomstack Pro 20 - Laser - legs
di kpr
2
Download
1
Likes
0
Makes
Once I got Atomstack Pro laser with 20watts I was very lucky. But not so long, I find out that they forgot pack three metal legs. I applied claim, but in meantime I want work with laser... so I did this leg.
What you need buy / mount :
1) It is mounted by one or two DIN 912 (L = 20mm)
2) Nut which slides in extrusion profile. (aliexpress)
You can use spacer to tailor the height. There is headroom about 1-2 milimeters.
3) As a leg, I used M8 hex bolt (M8x16 = to achieve 40mm as standart tall of Atomstack).
4) You need one M8 nut DIN 934, maybe littlebit of resin glue or cyanoacrylate to hold it.
What you need buy / mount :
1) It is mounted by one or two DIN 912 (L = 20mm)
2) Nut which slides in extrusion profile. (aliexpress)
You can use spacer to tailor the height. There is headroom about 1-2 milimeters.
3) As a leg, I used M8 hex bolt (M8x16 = to achieve 40mm as standart tall of Atomstack).
4) You need one M8 nut DIN 934, maybe littlebit of resin glue or cyanoacrylate to hold it.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
