ATtiny85 Socket

This is a socket for an ATtiny85, which allows you to connect to an ATtiny directly using jumper cables with a standard 0.1" header. This allows you to bypass using a breadboard so you can wire components directly to your ATtiny microcontroller (which in turns saves space in your design!)

The ATtiny press-fits into the top of the socket. Jumper cables can be fed from below. Additionally, you can feed wires through the top of the socket if necessary.

This socket exposes 2 programmable pins of the ATtiny (Pin 3/A3 and Pin 0). Pin 0 is a PWM pin. 5V and the GND pins are also accessible. See ATtiny pin diagram below:
Image taken from Sparkfun's ATTINY AVR Programmer Guide: https://learn.sparkfun.com/tutorials/tiny-avr-programmer-hookup-guide/attiny85-use-hints

ATinys are programmable using an Arduino Uno as a programmer or using the [Tiny AVR Programmer](https://w