ATX open air pc case

I wanted a small form factor ATX PC case and nothing I found was reasonably priced or very common so I decided to make my own.

-For the main body, I cut out of 1/3" acrylic sheets and used heat set inserts as spacers between them.

-3m screws should fit all the holes. the space between the plates I used to stuff the wires as much as I could. on some of the bolt holes on the 3d printed parts, I had to use a soldering iron to make them just a bit bigger so it was a snug fit.

-you can mount the GPU vertically as I have or normally( I have an rtx 3060)

-the printed parts are all designed to be a snug fit for a stable and strong case and minimize vibrations from fans or rad weight

--parts--

-3m screws of varying lengths, mostly 8mm and 10mm and 4x 20mm through the GPU mounts to sandwich the main body together.

-1/3"(6mm) acrylic or metal or plastic for the main body

-3m heat-set threaded inserts