Thingiverse
Au from Spelunky 2
di Daxarr
3
Download
5
Likes
0
Makes
The playable character Au from Spelunky 2.
Recommended to scale up to ~7cm tall to allow arm supports to print properly. Generate supports everywhere above 70 degrees to prevent front and back head supports from joining together under the legs. Print with a brim to prevent arm supports from disconnecting from the build plate.
If you use PLA+ like I did, recommend printing at 210°C to prevent clogging.
Commissioned by [arvindkumar849](https://www.fiverr.com/arvindkumar849) on fiverr.
Recommended to scale up to ~7cm tall to allow arm supports to print properly. Generate supports everywhere above 70 degrees to prevent front and back head supports from joining together under the legs. Print with a brim to prevent arm supports from disconnecting from the build plate.
If you use PLA+ like I did, recommend printing at 210°C to prevent clogging.
Commissioned by [arvindkumar849](https://www.fiverr.com/arvindkumar849) on fiverr.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
