Audi Logo

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200.16mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #13 (1.12mm) swap to Grey At layer #16 (1.36mm) swap to White for the rest.