audi r8

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x83.72mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA+ Sunlu Red Transmission Distance: 6PLA PolyLite White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to RedAt layer #19 (1.6mm) swap to White for the rest.