Aussiedoodle - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Desert Tan Transmission Distance: 1.1 PLA BambuLab Basic Cyan Transmission Distance: 8This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Brown At layer #14 (1.2mm) swap to Yellow At layer #20 (1.68mm) swap to Desert Tan At layer #24 (2mm) swap to Cyan for the rest.