Auston Matthews - Hueforge

Project: Mathews Hueforge DARKER.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150.4x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2.1mm Filaments Used: PLA BambuLab Matte Navy Transmission Distance: 0.6 PLA Bambu Lab Cobalt Blue Transmission Distance: 3 PLA Bambu Lab Gray Transmission Distance: 3 PLA Bambu Lab White Transmission Distance: 6 Swap Instructions: Start with Matte Navy At layer #9 (0.8mm) swap to Blue At layer #14 (1.2mm) swap to Gray At layer #18 (1.52mm) swap to White for the rest.